HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 639)

SROS Command Line Interface Reference Guide Frame Relay Sub-Interface Config Command Set

spanning-tree bpduguard [enable | disable]

Use the spanning-tree bpduguard command to block BPDUs from being received on this interface. To

return to the default value, use the no form of this command.

Syntax Description

enable Enable the BPDU block.

disable Disable the BPDU block.

Default Values

By default, this command is set to disable.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), and

virtual Frame Relay sub-interfaces (fr 1.20)

Usage Examples

The following example enables the bpduguard on the interface:

(config)#interface frame-relay 1.16

(config-fr 1.16)#spanning-tree bpduguard enable

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 639