HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 383)

100

101

SROS Command Line Interface Reference Guide IKE Policy Command Set

peer [<ip address> | any]

Use the peer command to enter the IP address of the peer device. Repeat this command for multiple peers.

Use the any keyword if you want to set up a policy that will initiate or respond to any peer.

Syntax Description

<ip address> Enter a peer IP address.

any Allow any peer to connect to this IKE policy.

Default Values

There are no default settings for this command.

Command Modes

(config-ike)# IKE Policy Configuration Mode

Functional Notes

An IKE policy is incomplete unless one of the peer commands is specified. Only one IKE policy can be

configured with

peer any

Usage Examples

The following example sets multiple peers on an IKE policy for an initiate and respond policy using pre-shared

secret, des, md5, and Diffie-Hellman group 1:

(config)#

crypto ike policy 100

(config-ike)#

peer 63.97.45.57

(config-ike)#

peer 63.105.15.129

(config-ike)#

peer 192.168.1.3

(config-ike)#

respond anymode

(config-ike)#

initiate main

The following example sets up a policy allowing any peer to initiate using pre-shared secret, des, md5, and

Diffie-Hellman group 1.

(config)#

crypto ike policy 100

(config-ike)#

peer any

(config-ike)#

respond anymode

(config-ike)#

initiate main

1 2 ... 378 379 380 381 382 383 384 385 386 387 388 ... 940 941

Commentaires sur ces manuels

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 383

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau HP 7000 dl Router Series