HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 393)

SROS Command Line Interface Reference Guide IKE Client Command Set

dns-server <address1> <address2>

Use the dns-server command to specify the DNS server address(es) to assign to a client.

Syntax Description

<address1> The first DNS server address to assign.

<address2> Optional. The second DNS server address to assign.

Default Values

By default, no DNS server address is defined.

Command Modes

(config-ike-client-pool)# IKE Client Configuration Mode

Usage Examples

The following example defines two DNS server addresses for this configuration pool:

(config-ike-client-pool)#dns-server 172.1.17.1 172.1.17.3

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 393