HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 848)

100

101

SROS Command Line Interface Reference Guide Loopback Interface Configuration Command Set

access-policy <policyname>

Use the access-policy command to assign a specified access policy to an interface. Use the no form of this

command to remove an access policy association.

Syntax Description

<policyname> Alphanumeric descriptor for identifying the configured access policy (all access

policy descriptors are case-sensitive).

Default Values

By default, there are no configured access policies associated with an interface.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), virtual

Frame Relay sub-interfaces (fr 1.20), loopback interfaces, and VLAN interfaces

(vlan 1)

Functional Notes

To assign an access policy to an interface, enter the interface configuration mode for the desired interface

and enter access policy <policy name>.

Usage Examples

The following example associates the access policy UnTrusted (to allow inbound traffic to the Web server)

to the loopback interface:

Enable the Secure Router OS security features:

(config)#ip firewall

Create the access list (this is the packet selector):

(config)#ip access-list extended InWeb

(config-ext-nacl)#permit tcp any host 63.12.5.253 eq 80

Create the access policy that contains the access list InWeb:

(config)#ip policy-class UnTrusted

(config-policy-class)#allow list InWeb

1 2 ... 843 844 845 846 847 848 849 850 851 852 853 ... 940 941

Commentaires sur ces manuels

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 848

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau HP 7000 dl Router Series