HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 834)

SROS Command Line Interface Reference Guide HDLC Command Set

ip ospf authentication [message-digest | null]

Use the ip ospf authentication command to authenticate an interface that is performing OSPF

authentication.

Syntax Description

message-digest

Optional. Select message-digest authentication type.

Optional. Select for no authentication to be used.

Default Values

By default, this is set to null (meaning no authentication is used).

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), virtual

HDLC interfaces (hdlc 1), virtual Frame Relay sub-interfaces (fr 1.20), tunnel

interfaces (tunnel 1), and VLAN interface (vlan 1).

Usage Examples

The following example specifies that no authentication will be used on the HDLC interface:

(config)#interface hdlc 1

(config-hdlc 1)#ip ospf authentication null

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 834