HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 573)

SROS Command Line Interface Reference Guide Frame Relay Interface Config Command Set

frame-relay lmi-n391dte <polls>

Use the frame-relay lmi-n391dte command to set the n391 full status polling counter for the DTE

endpoint. Typical applications should leave the default value for this timer. Use the no form of this

command to return to the default value.

Syntax Description

Sets the counter value (valid range: 1-255)

Default Values

<polls> 6 polls

Command Modes

(config-fr 1)# Virtual Frame Relay Interface Configuration Mode required

Functional Notes

The N391 counter determines how many link integrity polls occur in between full status polls. The number

of link integrty polls between full status polls is n-1, where n represents the full status poll. n can be set to

any number between 1 and 255, but the default is used for most applications.

Usage Examples

The following example sets the N391 counter for 3 polls:

(config)#interface frame-relay 1

(config-fr 1)#frame-relay lmi-n391dte 3

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 573