HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 703)

SROS Command Line Interface Reference Guide ADSL Interface Config Command Set

snr-margin [showtime monitor | training monitor] <margin>

Use the snr-margin command to enable monitoring and set the minimum signal-to-noise (SNR) ratio

during training and showtime. Use the no form of this command to disable monitoring.

Syntax Description

showtime monitor Enables margin monitoring to retrain the ADSL interface if the specified minimum

margin is violated during showtime.

training monitor Enables margin monitoring to retrain the ADSL interface if the specified minimum

margin is violated during training.

<margin> Sets the minimum SNR margin in dB. The range is from 1 to 15.

Default Values

By default, snr-margin monitoring is disabled.

Command Modes

(config-adsl 0/1)# Configure ADSL Interface

Usage Examples

The following example enables snr-margin monitoring during showtime with a minimum level of 7 dB:

(config-adsl 0/1)#snr-margin showtime monitor 7.

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 703