HP 7000 dl Router Series Guide de l'utilisateur Page 749

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 941
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 748
SROS Command Line Interface Reference Guide PPP Interface Configuration Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 749
ip helper-address <address>
Use the ip helper-address command to configure the Secure Router OS to forward User Datagram
Protocol (UDP) broadcast packets received on the interface. Use the no form of this command to disable
forwarding packets.
Syntax Description
<address> Specifies the destination IP address (in dotted decimal notation) for the forwarded
UDP packets.
Default Values
By default, broadcast UDP packets are not forwarded.
Command Modes
(config-interface)# Interface Configuration Mode required (applies to all physical interfaces as well as
virtual interfaces)
Functional Notes
When used in conjunction with the ip forward-protocol command, the ip helper-address feature allows
you to customize which broadcast packets are forwarded.
To implement the helper address feature, assign a helper-address(es) (specifying the device that needs to
receive the broadcast traffic) to the interface closest to the host that transmits the broadcast packets.
When broadcast packets (of the specified type forwarded using the ip forward-protocol command) are
received on the interface, they will be forwarded to the device that needs the information.
Only packets meeting the following criteria are considered eligible by the ip helper-address feature:
1. The packet IP protocol is User Datagram Protocol (UDP).
2. Any UDP port specified using the ip forward-protocol command.
3. The media access control (MAC) address of the frame is an all-ones broadcast address (ffff.ffff.ffff).
4. The destination IP address is broadcast defined by all ones (255.255.255.255) or a subnet broadcast
(for example, 192.33.4.251 for the 192.33.4.248/30 subnet).
Note
The ip helper command must be used in conjunction with the ip forward-protocol command
to configure the Secure Router OS forward UDP broadcast packets. See ip
forward-protocol udp <port number> on page 283 for more information.
Vue de la page 748
1 2 ... 744 745 746 747 748 749 750 751 752 753 754 ... 940 941

Commentaires sur ces manuels

Pas de commentaire