HP 7000 dl Router Series Guide de l'utilisateur Page 283

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 941
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 282
SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 283
ip forward-protocol udp <port number>
Use the ip forward-protocol udp command to specify the protocols and ports the Secure Router OS
allows when forwarding broadcast packets. Use the no form of this command to disable a specified
protocol or port from being forwarded.
Default Values
By default, the
Secure Router OS
forwards broadcast packets for all protocols and ports.
Command Modes
(config)# Global Configuration Mode
Note
The ip helper command must be used in conjunction with the ip forward-protocol command
to configure the Secure Router OS to forward UDP broadcast packets.
Syntax Description
<port number>
Specifies the UDP traffic type (using source port)
The following is the list of UDP port numbers that may be identified using the
text name:
biff (Port 512) pim-auto-rp (496)
bootps(Port 67) rip (Port 520)
discard (Port 9) snmp (Port 161)
dnsix (Port 195) snmptrap (Port 162)
domain (Port 53) sunrpc (Port 111)
echo (Port 7) syslog (Port 514)
isakmp (Port 500) tacacs (Port 49)
mobileip (Port 434) talk (Port 517)
nameserver (Port 42) tftp (Port 69)
netbios-dgm (Port 138) time (Port 37)
netbios-ns (Port 137) who (Port 513)
netbios-ss (Port 139) xdmcp (Port 177)
ntp (Port 123)
Alternately, the <port number> may be specified using the following syntax:
<0-65535>. Specifies the port number used by UDP to pass information to upper
layers. All ports below 1024 are considered well-known ports and are controlled
by the Internet Assigned Numbers Authority (IANA). All ports above 1024 are
dynamically assigned ports that include registered ports for vendor-specific
applications.
Vue de la page 282
1 2 ... 278 279 280 281 282 283 284 285 286 287 288 ... 940 941

Commentaires sur ces manuels

Pas de commentaire