HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 168)

SROS Command Line Interface Reference Guide Enable Mode Command Set

show lldp device <system name>

Use the show lldp device command to display specific neighbor information about a given neighbor.

Syntax Description

<system name> Specifies the system name of the neighbor to display.

Default Values

No default values are necessary for this command.

Command Modes

# Enable Command Mode

Functional Notes

If there is more than one neighbor with the same system name, all neighbors with that system name will be

Usage Examples

The following example shows specific information about a neighbor for the system name Router:

#show lldp device Router

Chassis ID: 00:12:79:02:DD:2A (MAC Address)

System Name: Router

Device Port: eth 0/1 (Locally Assigned)

Holdtime: 30

Platform: 3305

Software: Version: 08.00.22.sw1.D, Date: Mon Nov 01 10:28:55 2004

Capabilities: Bridge, Router

Enabled Capabilities: Router

Local Port: eth 0/2

Management Addresses:

Address Type: IP version 4, Address: 10.23.10.10

Interface Type: Interface Index, Interface Id: 2

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 168