HP 7000 dl Router Series Guide de l'utilisateur Page 931

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 941
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 930
Common Commands
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 931
ping <address>
Use the ping command (at the Enable Command Mode prompt) to verify IP network connectivity.
Syntax Description
<address> Optional.
Specifies the IP address of the system to ping. Entering the
ping
command
with no specified address prompts the user with parameters for a more detailed
ping
configuration. See
Functional Notes
(below) for more information.
Default Values
No default value necessary for this command.
Command Modes
> or # Basic or Enable Command Mode
Functional Notes
The ping command helps diagnose basic IP network connectivity using the Packet InterNet Groper
program to repeatedly bounce Internet Control Message Protocol (ICMP) Echo_Request packets off a
system (using a specified IP address). The Secure Router OS allows executing a standard ping request to
a specified IP address or provides a set of prompts to configure a more specific ping configuration.
The following is a list of output messages from the ping command:
! Success
- Destination Host Unreachable
$ Invalid Host Address
X TTL Expired in Transit
? Unknown Host
* Request Timed Out
The following is a list of available extended
ping
fields with descriptions:
Target IP address: Specifies the IP address of the system to ping.
Repeat Count: Number of ping packets to send to the system (valid range: 1 to 1000000).
Datagram Size: Size (in bytes) of the ping packet (valid range: 1 to 1448).
Timeout in Seconds: If a ping response is not received within the timeout period, the ping is
considered unsuccessful (valid range: 1 to 5 seconds).
Extended Commands: Specifies whether additional commands are desired for more ping
configuration parameters.
Vue de la page 930
1 2 ... 926 927 928 929 930 931 932 933 934 935 936 ... 940 941

Commentaires sur ces manuels

Pas de commentaire