HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 337)

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

snmp-server enable traps <trap type>

Use the snmp-server enable traps command to enable all Simple Network Management Protocol

(SNMP) traps available on your system or specified using the <trap type> option. Use multiple

snmp-server enable traps to enable multiple trap types. Use the no form of this command to disable traps

(or the specified traps).

Syntax Description

<trap type> Optional. Specifies the type of notification trap to enable. Leaving this option blank

enables ALL system traps.

snmp Enables a subset of traps specified in RFC 1157

The following traps are supported:

authenticationFailure

Default Values

By default, there are no enabled traps.

Command Modes

(config)# Global Configuration Mode required

Usage Examples

The following example enables the SNMP traps:

(config)#snmp-server enable traps snmp

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 337