HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 571)

SROS Command Line Interface Reference Guide Frame Relay Interface Config Command Set

frame-relay intf-type <type>

Use the frame-relay intf-type command to define the Frame Relay signaling role needed for the endpoint.

Use the no form of this command to return to the default value.

Syntax Description

<type> Specifies the Frame Relay interface types as DTE, DCE, or NNI

dce DCE or Network signaling role. Use this interface type when you need the unit to

emulate the frame switch.

dte DTE or User signaling role. Use this interface type when connecting to a Frame

Relay switch (or piece of equipment emulating a frame switch).

nni Configures the interface to support both network and user signaling (DTE or DCE)

when necessary.

Default Values

Command Modes

(config-fr 1)# Virtual Frame Relay Interface Configuration Mode required

Usage Examples

The following example configures the Frame Relay endpoint for DCE signaling:

(config)#interface frame-relay 1

(config-fr 1)#frame-relay intf-type dce

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 571