HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 744)

SROS Command Line Interface Reference Guide PPP Interface Configuration Command Set

fair-queue <threshold>

Use the fair-queue command to enable weighted fair queuing (WFQ) on an interface. Use the no form of

this command to disable WFQ and enable FIFO queueing for an interface. WFQ is enabled by default for

WAN interfaces.

Syntax Description

<threshold> Optional value that specifies the maximum number of packets that can be present

in each conversation sub-queue. Packets received for a conversation after this

limit is reached are discarded. Range: 16 to 512 packets.

Default Values

By default, fair-queue is enabled with a threshold of 64 packets.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: virtual PPP (ppp 1) and virtual Frame Relay interfaces

Usage Examples

The following example enables WFQ on the interface with a threshold set at 100 packets:

(config)#interface ppp 1

(config-ppp 1)#fair-queue 100

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 744