HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 920)

Quality of Service (QoS) Map Commands

set dscp <0-63>

The set dscp command is an optional command for a QoS map that can be used to modify the DSCP field

(on matching packets) to the specified value.

Syntax Description

<0-63> Enter the decimal DSCP value.

Default Values

No default value is necessary for this command.

Command Modes

(config-qos-map)# QoS Map Configuration Mode required.

Usage Examples

This command sets the DSCP value (for all matching traffic) to 46:

(config)#qos map VOICEMAP 10

(config-qos-map)#set dscp 46

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 920