HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 140)

SROS Command Line Interface Reference Guide Enable Mode Command Set

show ip access-lists <listname>

Use the show ip access-lists command to display all configured IP access lists in the system.

Syntax Description

<listname> Optional.

Specify a particular access list to display.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Functional Notes

The show ip access-lists command displays all configured IP access-lists in the system. All entries in the

access list are displayed, and a counter indicating the number of packets matching the entry is listed.

Usage Examples

The following is a sample output from the show ip access-lists command:

#show ip access-lists

Standard IP access list MatchAll

permit host 10.3.50.6 (0 matches)

permit 10.200.5.0 wildcard bits 0.0.0.255 (0 matches)

Extended IP access list UnTrusted

deny icmp 10.5.60.0 wildcard bits 0.0.0.255 any source-quench (0 matches)

deny tcp any any (0 matches)

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 140