HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 726)

100

101

SROS Command Line Interface Reference Guide PPP Interface Configuration Command Set

bridge-group <group#> bpdufilter [enable | disable]

Use the bridge-group bpdufilter command to block BPDUs from being transmitted and received on this

interface. To return to the default value, use the no form of this command.

Syntax Description

<group#> Bridge group number (1 to 255) specified using the bridge-group command.

enable Enable the BPDU filter.

disable Disable the BPDU filter.

Default Values

By default, this command is set to disable.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), and

virtual Frame Relay sub-interfaces (fr 1.20)

Functional Notes

The purpose of this command is to remove a port from participation in the spanning-tree. This might be

beneficial while debugging a network setup. It normally should not be used in a live network.

Usage Examples

The following example enables the bpdufilter on the interface:

(config)#interface ppp 1

(config-ppp 1)#bridge-group 1 bpdufilter enable

1 2 ... 721 722 723 724 725 726 727 728 729 730 731 ... 940 941

Commentaires sur ces manuels

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 726

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau HP 7000 dl Router Series