HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 580)

SROS Command Line Interface Reference Guide Frame Relay Interface Config Command Set

frame-relay lmi-type <type>

Use the frame-relay lmi-type command to define the Frame Relay signaling (LMI) type. Use the no form

of the command to return to the default value.

Syntax Description

<type> Sets the signaling type for the endpoint

ansi Annex D signaling method

auto Automatically determine signaling type by messages received on the frame circuit

cisco Group of 4 signaling method

none Turns off signaling on the endpoint. This is used for backup connections.

q933a Annex A signaling method

Default Values

Command Modes

(config-fr 1)# Virtual Frame Relay Interface Configuration Mode required

Usage Examples

The following example sets the signaling method for the endpoint to cisco:

(config)#interface frame-relay 1

(config-fr 1)#frame-relay lmi-type cisco

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 580