HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 346)

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

spanning-tree bpduguard default

Use the spanning-tree bpduguard default command to enable the bpduguard on all ports by default. Use

the no form of this command to disable the setting.

Syntax Description

No subcommands.

Default Values

Disabled by default.

Command Modes

(config)# Global Configuration Mode required

Functional Notes

The bpduguard blocks any BPDUs from being received on an interface. This can be overridden on an

individual port.

Usage Examples

The following example enables the bpduguard on all ports by default.

(config)#spanning-tree bpduguard default

To disable the bpduguard on a specific interface, issue the appropriate commands for the given interface

(using the following commands as an example):

(config)#interface ethernet 0/1

(config-eth 0/1)#spanning-tree bpduguard disable

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 346