HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 578)

SROS Command Line Interface Reference Guide Frame Relay Interface Config Command Set

frame-relay lmi-t391dte <seconds>

Use the frame-relay lmi-t391dte command to set the T391 signal polling timer for the DTE endpoint.

Typical applications should leave the default value for this timer. Use the no form of this command to

return to the default value.

Syntax Description

<seconds> Sets the timer value in seconds (valid range: 5-30)

Default Values

<seconds> 10 seconds

Command Modes

(config-fr 1)# Virtual Frame Relay Interface Configuration Mode required

Functional Notes

The T391 timer sets the time (in seconds) between polls to the Frame Relay network.

Usage Examples

The following example sets the T391 timer for 15 seconds:

(config)#interface frame-relay 1

(config-fr 1)#frame-relay lmi-t391dte 15

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 578