HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 267)

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

ip dhcp-server pool <name>

Use the ip dhcp-server pool command to create a DHCP address pool and enter the DHCP pool. Use the

no form of this command to remove a configured DHCP address pool. See the section DHCP Pool

Command Set on page 355 for more information.

Syntax Description

<name> Alphanumeric string (up to 32 characters in length) used as an identifier for the

configured DHCP server address pool (example SALES)

Default Values

By default, there are no configured DHCP address pools.

Command Modes

(config)# Global Configuration Mode required

Functional Notes

Use the ip dhcp-server pool to create multiple DHCP server address pools for various segments of the

network. Multiple address pools can be created to service different segments of the network with tailored

configurations.

Usage Examples

The following example creates a DHCP server address pool (labeled SALES) and enters the DHCP server

(config)#ip dhcp-server pool SALES

(config-dhcp)#

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 267