HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 301)

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

ip radius source-interface <interface>

Use the ip radius source-interface command to specify the NAS (network-attached storage) IP address

attribute passed with the RADIUS authentication request packet.

Syntax Description

<interface> Specifies the source interface (in the format type slot/port). Type ip radius

source-interface ? for a complete list of interfaces.

Default Values

By default, no source interface is defined.

Command Modes

(config)# Global Configuration Mode required

Functional Notes

If this value is not defined, the address of the source network interface is used.

Usage Examples (Continued)

The following example configures the Ethernet 0/1 port to be the source interface:

(config)#ip radius source-interface ethernet 0/1

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 301