HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 837)

100

101

SROS Command Line Interface Reference Guide HDLC Command Set

ip rip receive version [1 | 2]

Use the ip rip receive version command to configure the RIP version the unit accepts in all RIP packets

received on the interface. Use the no form of this command to restore the default value.

Syntax Description

Only accept received RIP version 1 packets on the interface.

Only accept received RIP version 2 packets on the interface.

Default Values

By default, all interfaces implement RIP version 1 (the default value for the version command).

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), virtual

HDLC interfaces (hdlc 1), virtual Frame Relay sub-interfaces (fr 1.20), tunnel

interfaces (tunnel 1), and VLAN interface (vlan 1).

Functional Notes

Use the ip rip receive version command to specify a RIP version that overrides the version (in the

Router RIP) configuration. See

version <version> on page 902 for more information.

The SROS only accepts one version (either 1 or 2) on a given interface.

Usage Examples

The following example configures the HDLC interface to accept only RIP version 2 packets:

(config)#interface hdlc 1

(config-hdlc 1)#ip rip receive version 2

1 2 ... 832 833 834 835 836 837 838 839 840 841 842 ... 940 941

Commentaires sur ces manuels

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 837

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau HP 7000 dl Router Series