HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 193)

SROS Command Line Interface Reference Guide Enable Mode Command Set

show version

Use the show version command to display the current Secure Router OS version information.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

> or # Basic or Enable Command Mode

Usage Examples

The following is a sample show version output:

#show version

ProCurve Secure Router 7203dl

SROS Version: 08.01.04.HP.E

Checksum: 4F8DCF96, built on: Tue Dec 21 08:32:18 2004

Boot ROM version 08.01.04.HP

Checksum: B133, built on: Tue Dec 21 08:32:25 2004

Platform: ProCurve Secure Router 7203dl

Serial number UNKNOWN

Flash: 33554432 bytes DRAM: 268435455 bytes

System uptime is 0 days, 0 hours, 22 minutes, 42 seconds

Current system image file is "HP7203A-08-01-04-HP-E.biz"

Primary boot system image file is "HP7203A-08-01-04-HP-E.biz"

Backup boot system image file is "NONVOL:/J01_01_03.biz"

Primary system configuration file is "startup-config"

Backup system configuration file is "CFLASH:/startup-config"

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 193