HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 142)

SROS Command Line Interface Reference Guide Enable Mode Command Set

show ip /jointfilesconvert/63229/bgp

Use the show ip /jointfilesconvert/63229/bgp command to display a summary of the BGP table.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Functional Notes

Entries that are not filtered by prefix lists are marked with an asterisk (*) to show they are valid. Entries

that are deemed the best path to advertised route are marked with a caret (>).

Usage Examples

The following shows sample output of the command:

#show ip /jointfilesconvert/63229/bgp

BGP local router ID is 10.0.0.1, local AS is 101.

Status codes: * valid, > best, i - internal

Origin codes: i - IGP, e - EGP, ? - incomplete

Network NextHop Metric Path

*> 1.0.0.0/8 10.15.43.17 1 100 i

*> 2.0.0.0/9 10.15.43.17 1 100 i

*> 2.128.0.0/10 10.15.43.17 1 100 i

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 142