HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 166)

SROS Command Line Interface Reference Guide Enable Mode Command Set

show ip traffic

Use the show ip traffic command to display all IP traffic statistics.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

#show ip traffic

IP statistics:

Routing discards: 0

Rcvd: 15873 total, 7617 delivered

0 header errors, 0 address errors

0 unknown protocol, 0 discards

0 checksum errors, 0 bad hop counts

Sent: 8281 generated, 4459 forwarded

0 no routes, 0 discards

Frags: 0 reassemble required, 0 reassembled, 0 couldn't reassemble

0 created, 0 fragmented, 0 couldn't fragment

UDP statistics:

Rcvd: 3822 total, 0 checksum errors, 0 no port

Sent: 3822 total

TCP statistics:

Retrans Timeout Algorithm: 0

Min retrans timeout (ms): 0

Max retrans timeout (ms): 0

Max TCP Connections: 0

0 active opens, 64 passive opens, 0 failed attempts

5 establish resets, 1 establish current

3795 segments received, 4459 segments sent, 26 segments retransmitted

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 166