HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 823)

SROS Command Line Interface Reference Guide HDLC Command Set

hold-queue <queue size> out

Use the hold-queue command to change the overall size of an interface's WAN output queue.

Syntax Description

<queue size> The total number of packets the output queue can contain before packets are

dropped. Range: 16-1000.

Default Values

The default queue size for WFQ is 400. The default queue size for PPP FIFO and Frame Relay

round-robin is 200.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), virtual

HDLC interfaces (hdlc 1), virtual Frame Relay sub-interfaces (fr 1.20), tunnel

interfaces (tunnel 1), and VLAN interface (vlan 1).

Usage Examples

The following example sets the overall output queue size to 700:

(config)#interface hdlc 1

(config-hdlc 1)#hold-queue 700

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 823