HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 325)

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

mac address-table static <mac address> vlan <vlan id> interface

[ethernet | atm] <interface id>

Use the mac address-table static command to insert a static MAC address entry into the MAC address

table. Use the no form of this command to remove an entry from the table.

Syntax Description

<mac address> Enter a valid 48-bit MAC address.

<vlan id> Enter a valid VLAN interface ID (1-4094).

interface Choose either the ethernet or atm interface.

<interface id> Enter any valid slot/port interface ID (e.g., eth 0/1).

Default Values

By default, there are no static entries configured.

Command Modes

(config)# Global Configuration Mode required

Usage Examples

The following example adds a static MAC address to Ethernet 0/1 on VLAN 4:

(config)#mac address-table static 00:12:79:00:00:01 vlan 4 interface ethernet 0/1

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 325