HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 684)

SROS Command Line Interface Reference Guide ATM Sub-Interface Config Command Set

ip ospf network [broadcast | point-to-point]

Use the ip ospf network command to specify the type of network on this interface.

Syntax Description

broadcast Set the network type for broadcast.

point-to-point Set the network type for point-to-point.

Default Values

By default, Ethernet defaults to broadcast. PPP and Frame Relay default to point-to-point.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: ATM sub-interface, Ethernet, virtual PPP interfaces,

virtual Frame Relay sub-interfaces, and loopback interfaces

Functional Notes

A point-to-point network will not elect designated routers.

Usage Examples

The following example designates a broadcast network type:

(config-atm 1.1)#ip ospf network broadcast

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 684