HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 81)

100

101

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug ip icmp [send | recv]

Use the debug ip icmp command to show all ICMP messages as they come into the router or are

originated by the router. If an optional keyword (send or recv) is not used, all results are displayed. Use the

no form of this command to disable the debug messages.

Syntax Description

send

Optional keyword which allows you to only display ICMP messages sent by the router.

recv

Optional keyword which allows you to only display ICMP messages received by the

router.

Default Values

By default, all debug messages in the Secure Router OS are disabled.

Command Modes

# Enable Command Mode

Usage Examples

The following example activates the debug ip icmp send and receive messages for the Secure Router

OS:

>enable

#debug ip icmp

ICMP SEND: From (0.0.0.0) to (172.22.14.229) Type=8 Code=0 Length=72 Details:echo request

ICMP RECV: From (172.22.14.229) to (10.100.23.19) Type=0 Code=0 Length=72 Details:echo reply

ICMP SEND: From (0.0.0.0) to (172.22.14.229) Type=8 Code=0 Length=72 Details:echo request

ICMP RECV: From (172.22.14.229) to (10.100.23.19) Type=0 Code=0 Length=72 Details:echo reply

ICMP RECV: From (172.22.255.200) to (10.100.23.19) Type=11 Code=0 Length=36 Details:TTL equals 0

during transit

ICMP RECV: From (172.22.14.229) to (10.100.23.19) Type=3 Code=3 Length=36 Details:port

unreachable

ICMP RECV: From (172.22.14.229) to (10.100.23.19) Type=3 Code=3 Length=36 Details:port

unreachable

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 940 941

Commentaires sur ces manuels

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 81

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau HP 7000 dl Router Series