HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 802)

100

101

Command Reference Guide Tunnel Configuration Command Set

ip route-cache

Use the ip route-cache command to enable fast-cache switching on the interface. Use the no form of this

command to disable fast-cache switching and return to process switching mode.

Syntax Description

No subcommands.

Default Values

By default, fast-cache switching is enabled on all Ethernet and virtual Frame Relay sub-interfaces. IP

route-cache is enabled for all virtual PPP interfaces.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), PPP virtual interfaces (ppp 1), HDLC

virtual interfaces (hdlc 1), Frame Relay virtual sub-interfaces (fr 1.20), tunnel

interfaces (tunnel 1), and VLAN interface (vlan 1).

Functional Notes

Fast switching allows an IP interface to provide optimum performance when processing IP traffic.

Usage Examples

The following example enables fast switching on the tunnel interface:

(config)#interface tunnel 1

(config-tunnel 1)#ip route-cache

Note

Using Network Address Translation (NAT) or the SROS firewall capabilities on an

interface requires process switching mode (using the no ip route-cache command).

1 2 ... 797 798 799 800 801 802 803 804 805 806 807 ... 940 941

Commentaires sur ces manuels

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 802

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau HP 7000 dl Router Series