HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 367)

SROS Command Line Interface Reference Guide DHCP Pool Command Set

netbios-node-type <type>

Use the netbios-node-type command to specify the type of NetBIOS node used with Dynamic Host

Configuration Protocol (DHCP) clients. Use the no form of this command to remove a configured

NetBIOS node type.

Syntax Description

<type> Specifies the NetBIOS node type used with DHCP clients.

Valid node types are as follows:

b-node (1) - Broadcast node

p-node (2) - Peer-to-Peer node

m-node (4) - Mixed node

h-node (8) - Hybrid node (Recommended)

Alternately, the node type can be specified using the numerical value listed next to

the nodes above (valid range: 1 to 8).

Default Values

<type> h-node (8) - Hybrid node

Command Modes

(config-dhcp)# DHCP Pool

Usage Examples

The following example specifies a client’s NetBIOS node type as h-node:

(config)#ip dhcp-server pool MyPool

(config-dhcp)#netbios-node-type h-node

Alternately, the following also specifies the client’s NetBIOS node type as h-node:

(config-dhcp)#netbios-node-type 8

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 367