HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 693)

SROS Command Line Interface Reference Guide ATM Sub-Interface Config Command Set

pvc <VPI/VCI>

Use the pvc command to select the ATM virtual link for this sub-interface. Use the no form of this

command to remove the link.

Syntax Description>

<VPI/VCI> Specifies the ATM network virtual path identifier (VPI) for this PVC and the ATM

network virtual path identifier (VPI) for this PVC. The VPI value is in the range of 0

to 255, and the VCI value is in the range of 32 to 65535.

Default Values

No default value is necessary for this command.

Command Modes

(config-atm 1.1)# ATM Sub-Interface Configuration Mode required

Usage Examples

The following example sets the VPI to 8 and the VCI to 35:

(config)#interface atm 1.1

(config-atm 1.1)#pvc 8/35

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 693