HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 164)

100

101

SROS Command Line Interface Reference Guide Enable Mode Command Set

<subnet>]

Use the show ip route command to display the contents of the IP route table.

Syntax Description

connected Optional.

Displays only the IP routes for directly connected networks.

ospf Optional. Displays only the IP routes associated with OSPF.

rip Optional. Displays only the IP routes that were dynamically learned through RIP.

static Optional. Displays only the IP routes that were statically entered.

table Optional. Displays a condensed version of the IP route table.

/jointfilesconvert/63229/bgp Optional.

Displays only the IP routes associated with BGP.

<ip address><subnet> Displays only the IP routes to destinations within the given address and subnet.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following is a sample output from the show ip route command:

>enable

#show ip route rip

Codes: C - connected S - static R - RIP O - OSPF IA - OSPF inter area

N1 - OSPF NSSA external type 1 N2 - OSPF NSSA external type 2

E1 - OSPF external type 1 E2 - OSPF external type 2

Gateway of last resort is 10.200.254.254 to network 0.0.0.0

The following example shows how to display IP routes learned via BGP. The values in brackets after a

BGP route entry represent the entry's administrative distance and metric:

#show ip route /jointfilesconvert/63229/bgp

Codes: C - connected, S - static, R - RIP, O - OSPF, B - BGP

IA - OSPF inter area, N1 - OSPF NSSA external type 1

N2 - OSPF NSSA external type 2, E1 - OSPF external type 1

E2 - OSPF external type 2

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 940 941

Commentaires sur ces manuels

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 164

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau HP 7000 dl Router Series