HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 495)

100

101

SROS Command Line Interface Reference Guide Serial Interface Configuration Command Set

et-clock-source <source>

Use the et-clock-source command to configure the clock source used when creating the external transmit

(reference clock). Use the no form of this command to return to the default value.

Syntax Description

<source> Specifies the signal source to use when creating the External Transmit reference

clock (et-clock).

rxclock Use the clock recovered from the receive signal to generate et-clock.

txclock Use the clock recovered from the transmit signal to generate et-clock.

Default Values

<source> txclock

Command Modes

(config-ser 1/1)# Serial Interface Configuration Mode

Functional Notes

External Transmit clock (et-clock) is an interface timing signal (provided by the DTE device) used to

synchronize the transfer of transmit data.

Usage Examples

The following example configures the serial interface to recover the clock signal from the received signal

and use it to generate et-clock:

(config)#interface serial 1/1

(config-ser 1/1)#et-clock-source rxclock

1 2 ... 490 491 492 493 494 495 496 497 498 499 500 ... 940 941

Commentaires sur ces manuels

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 495

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau HP 7000 dl Router Series