HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 416)

SROS Command Line Interface Reference Guide Radius Group Command Set

RADIUS GROUP COMMAND SET

To activate the Radius Group , enter the aaa group server command at the Global Configuration Mode

prompt. For example:

configure terminal

Router(config)#

aaa group server radius myServer

Router(config-sg-radius)#

The following commands are common to multiple command sets and are covered in a centralized section

of this guide. For more information, refer to the sections listed below:

bind <#> <from interface> <slot/port> <tdm-group#> <to interface> <slot/port> on page 924

description on page 927

do on page 928

end on page 929

exit on page 930

ping <address> on page 931

show running-config on page 933

All other commands for this command set are described in this section in alphabetical order.

server [acct-port <port number>| auth-port <port number>] on page 417

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 416