HP 7000 dl Router Series Guide de l'utilisateur télécharger pdf (Page 697)

100

101

SROS Command Line Interface Reference Guide ATM Sub-Interface Config Command Set

spanning-tree edgeport [disable]

Use the spanning-tree edgeport command to set this interface to be an edgeport. This configures the

interface to go to a forwarding state when the link goes up. To return to the default value, use the no form

of this command.

Syntax Description

disable Optional.

Configure the interface to not be the edgeport by default. This command is

designed to override the global setting of the

bridge-group <group#> edgeport

default

on page 247

Default Values

By default, this command is set to disable.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: ATM sub-interface, Ethernet, virtual PPP interfaces, and

virtual Frame Relay sub-interfaces

Usage Examples

The following example configures the interface to be an edgeport:

(config)#interface atm 1.1

(config-atm 1.1)#spanning-tree edgeport

An individual interface can be configured to not be considered an edgeport. For example:

(config)#interface atm 1.1

(config-atm 1.1)#spanning-tree edgeport disable

(config)#interface atm 1.1

(config-atm 1.1)#no spanning-tree edgeport

1 2 ... 692 693 694 695 696 697 698 699 700 701 702 ... 940 941

Commentaires sur ces manuels

Pas de commentaire

HP 7000 dl Router Series Guide de l'utilisateur Page 697

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau HP 7000 dl Router Series